Description
The SV172-176 Switchview throw lever is pretty much a “must have” addition to any variable powered magnified optic. We’ve heard customers say it many times before…”once you use one, you won’t be able to figure out how you ever shot without one before”!!!
Just like our entire line of standard and folding Switchview throw levers, we machine our SV172-176 Switchview throw lever is out of 6061-T6 aluminum. We also hard anodize all of our aluminum products to provide you many years of “hard use” no matter what you’re doing with your gear. We’re also proud to say that 100% of the Switchview product line is manufactured in the United States of America.
If you haven’t seen the “DSFD” (Double Screw Fold Down) version of this Switchview, you can check it out here.
Our DSFD Switchview throw lever is our definition of simplification. The two-screw design increases adaptability for a more precise fit on various scope brands and models.
We’ve integrated our new “folding” design into these new DSFD levers for several reasons. The main reason is it won’t hang up on stuff! Whether you’re using your rifle for hunting, competition, or work, you’ll find that the new folding design offers many benefits over our fixed levers.
We usually mount the Switchview so the lever folds back towards the rear of the gun. This way it will fold down when you’re stuffing it into a soft case, discarding it into a drop box in a competition or dragging it through the bushes and trees on a hunt. If you want it to be a little “stiffer” you can add a little tension to the screw that holds it in place.
If you want a little longer top or a little shorter top, we have one hole and three hole replacements as well. Check them our on our “lever top” page you can find here. https://www.switchviewusa.com/product-category/lever-top/
The SV172-176 Switchview throw lever fits scopes such as:
- Burris M-TAC 1-4
- Horus Blackbird 1.5-8, Hawk, Talon 1-4
- Meopta Meostar
- Millet DMS 1-4, 6-25
- Nightforce ATACR
- Nikon M223 3-12
- Vortex: Razor HD w/ rubber magnification ring, Viper w/ metal magnification ring: PST, HS-T, HS LR, HS models, Viper XBR crossbow scope, Diamondback HP riflescope.
- Other scopes with similar dimensions.
*Scope makers modify designs without notice. Measurement of scope magnification ring before ordering Switchview is recommended.*
Specs:
Lever length: .880”.
Ring diameter: Variable – 1.720 – 1.760″ round – NOTE, fits only on round scope rings with no index bump/knob.
Color: Anodized Flat Black.
Switchview levers ordered in err because you measured incorrectly (or didn’t measure), can be returned but there will be a $15.00 handling fee. If you’d like it replaced with the correct one, shipping for the new lever will also be charged.
Anonymous (verified owner) –
Fits like a glove and makes scope adjustment super easy. Do be sure to measure your scope ring accordingly.
Richard (verified owner) –
Just installed this on my new Primary Arms 3-18 and have one on all my other scopes as well. I would not own a scope without putting a Switchview on it.
Kevin Fieldgrove (verified owner) –
Richard (verified owner) –
Not much to say about a perfect product, I finally got another scope so the moment it arrived I broke out the digital caliper and ordered my lever. I put Switchview Levers on all my scopes they just make adjustment easy.
Fred H. (verified owner) –
A very good product. I will tell and buy more when needed.
AntonioBow –
The SwitchView is specifically designed to fit particular scopes so please ensure your scope is listed below in the “fits” section. Write a Review This product hasn’t received any reviews yet. Be the first to review this product!
Alan (verified owner) –
Was able to measure my old discontinued scope, look up the spec’s on the various levers and ordered the one I thought should fit. Shipping was timely and trackable and the lever fit perfectly. Minimal use thus far but believe it should hold up well.